
262
26
RFGSM-220M
+ -
N
L
230V AC
+
-
N
L
230V AC
+
-
12V DC
RFTI-10B
+ - 18 16 15 28 26 25
IN1 IN1 IN2 IN2 IN3 IN3 IN4 IN4
Description of the device
RF transmitter: multifunction GSM communicator RFGSM-220M
The GSM communicator can be used for remote switching of heating, lights, barriers, gates and for ascertaining
the status of the RF Control actuator (ON, OFF, temperature level)
GSM communicator can be used in three ways:
a) independently – reacts to SMS or ringing phone once, where it switches an internal relay or reacts to 1 of 4 inputs
b) with RF Control actuators – the switch command is sent to a switching actuator within range, which then
switches (ex. heating)
c) with the RF Touch unit – where it is possible to request information by mobile phone on the actuator status,
and switch the actuator based on this
setting is performed using software supplied with GSM communicator via a mini USB connector, OSMS Windows XP
and newer. RFGSM software is available for download at the manufacturer website: www.elkoep.com/download/
GSM contains:
- 4x potential-free, separated inputs for connecting other devices (ex. smoke detectors, blind actuators, heat
sensors, etc. )
- 2x output relays Switch 8A (ex. contactor, lighting, command for heating circuit, etc.)
- 2x antenna (-for GSM, - for RF communication)
- LI-ION batteries for backing up GSM communicator function for up to 30 min.
package includes: - 2x internal antenna AN-I
- mini USB connector - power cord used for SW installation in the GSM communicator
- SW connector 1
- power supply adapter 12V 6W
optional accessories: external antenna AN-E. More information on p. 45
RF antenna
GSM antenna
Supply voltage 11-30V DC /500 mA (Terminals)
(Connector)
Slot for SIM card
Output contacts relay 2
Output contacts relay 1
Mini USB connector
Input 4
Input 3
Input 2
Input 1
Technical parameters
EAN code
RFGSM-220M:8595188146043
External antenna AN-E: 859415759012
Internal antenna AN-I: 8595188161862
11-30V DC; backup power supply LI-ION batteries
90 mA AC1 /12 V DC
max. 500mA AC1 / 12 V DC
850/900/1800/1900 MHz
2W pro GSM 900, 1W for GSM 1800
AC 12-230V or DC 12-230V (separated optocoupler)
AC 0.025 VA/ DC 0.1W
min. 25ms/ max. unlimited
one-way/two-way addressed message 868 MHz
2x Switches (AgSnO
2
)
8 A / AC1
2500VA, 240 W
500 mW
1x10
7
1x10
5
two-way addressed message 868 MHz
MS Windows XP a higher
up to 150 m
- 15 up to + 50°C
any
DIN rail EN 60715
IP 20 from front panel
2
max. 1x2.5; max.2x1.5/ with a hollow max 1x2.5
90 x 52 x 65
198 g
EN 60730-1
Power
Supply voltage:
Current consumption:
Consumption during communication:
Working band of GSM module:
Transmitter output power:
Inputs IN1, IN2, IN3, IN4
Control voltage:
Control input power:
Length of control impulse:
Inputs RF:
Outputs
Number of contacts:
Rated current:
Switching power:
Min. switching power DC:
Mechanical service life (AC1):
Electrical service life:
RF ouputs:
Further data
Operating system PC:
Range of RF module:
Operating temperature:
Operating position:
Mounting:
Protection:
Contamination degree:
Cross-section of connecting wires (mm
2
)
Dimensions:
Weight:
Related standards:
SW Connect1 for confi guration of GSM gate
CONTROL ELEMENTS
LED indication
Supply voltage indication
USB connection
USB initialization
RF
GSM
Battery indication
Available for download at www.elkoep.com/download/
PIR detector
Smoke detector
Door detector
Connection of wire detectors/sensors
Supply voltage detection
Setup via PC/Notebook
Control of appliances
Power supply
10-30V AC
Controlling RF actuators
Power supply
possible via
network
adapter
Sending SMS or
ringing through
once
Receiving signals from RF sensors
Detection of switching on/o of appliance
Control via SMS
or ringing through once
!
!
!
!
!
!
3M
Comentarios a estos manuales